PrimeLine 1270 mm 52.5 W | Transparent | Emergency CB | 2×M20 · 5-pole terminal

338,59 €
Type
Emergency (central battery; no addressing)
Zone (attribute)
1
Length
1270 mm
Power
52.5 W
Flux AC
7293 lm
Diffuser
Transparent
Glands
M20 / 2 glands, one side only
Ambient
-40°C…+50°C
IP
IP66 / IP67

Ex II 2G Ex eb mb IIC T4 Gb – Ex II 2D Ex tb IIIC T70°C Db

SKU: PL 12-2 550BOT
Category: , ,

Description

PL 12-2 550BOT is a PrimeLine luminaire, length 1270 mm, power 52.5 W, Transparent diffuser. PrimeLine ATEX emergency luminaire for central battery systems. Backup power comes from a compatible central system, not from a battery inside the luminaire. Certification covers Zones 1, 2, 21 and 22. GRP body, PC diffuser, IP66/IP67. Version B: central battery without addressing. Confirm system compatibility before ordering.

Technical specification

Parameters PL 12-2 550BOT
Ordering code PL 12-2 550BOT
Dimensions L×D×H 1270x173x107
Power 52.5 W
Luminous flux AC 7293 lm
Luminous flux DC (emergency) 7293 lm
Colour temperature 4000 K
CRI >80
IP IP66 / IP67
IK IK09
Housing GRP
Diffuser Transparent (PC)
Cable glands M20 — 2 glands, one side only
Terminals 5-pole
Through wiring Not applicable
Isolating switch no
Ambient temperature -40°C…+50°C
ATEX / IECEx Ex II 2G Ex eb mb IIC T4 Gb – Ex II 2D Ex tb IIIC T70°C Db
Zone 1

Code PL 12-2 550BOT means: 1270 mm, ~12 W LED module, 5-pole terminal, M20 (2 glands, one side only), central battery, no addressing, no isolating switch, transparent diffuser.

Applications and limitations

  • backup power from a central system — not from a battery inside the luminaire;
  • version B: central battery without addressing; confirm system compatibility;
  • take photometric and Ex data from this SKU / nameplate — do not generalise the whole family;
  • install per IEC 60079-14 and the instruction for the exact version (S/B, 1/3 or X/Y);
  • final selection must be made by a competent person for the installation.

Documents

FAQ

Does this luminaire have ATEX and IECEx certificates?

Yes. PrimeLine is covered by ATEX KSCP 25ATEX0029X and IECEx KSCP 25.0045X. Take the full Ex marking and temperature from the nameplate / this SKU.

Which zones is it intended for?

Certification covers gas Zones 1 and 2 and dust Zones 21 and 22. In the shop the Zone attribute for PrimeLine is 1. Final selection depends on the installation documents.

What is the ambient temperature range?

For PL 12-2 550BOT: -40°C…+50°C. HT/LT suffixes change the range — always confirm in the product code.

Does the luminaire include its own battery?

No. Backup power comes from a central system. Confirm CBX/CBY/B compatibility before ordering.

How does general lighting differ from emergency variants?

Code S = general. Codes 1/3 = internal battery (1.5 h / 3 h). Codes B/X/Y = central battery. These are separate SKUs and category children.

Where can I download the certificate and instructions?

See Documents on this page: ATEX, IECEx, EU declaration, data sheet, version-specific instruction and photometry.

Other PrimeLine lengths / powers — Central battery (no addressing) · Transparent diffuser

Same function subcategory and the same terminals, gland layout and diffuser. Length and LED module vary. The current SKU is highlighted.

SKU Length Module Power Flux AC
PL 60-1 550BOT 670 mm 1 23.4 W 2946 lm
PL 60-2 550BOT 670 mm 2 28.0 W 3613 lm
PL 60-3 550BOT 670 mm 3 32.4 W 4185 lm
PL 12-1 550BOT 1270 mm 1 43.0 W 5979 lm
PL 12-2 550BOT 1270 mm 2 52.5 W 7293 lm
PL 12-3 550BOT 1270 mm 3 62.0 W 8305 lm

Additional information

Type

Zone

Length

1270 mm

Diffuser

Gland size

Gland layout

Terminals

Isolating switch

Through wiring

Colour temperature

Ex protection

,

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.