PrimeLine 670 mm 23.4 W | Opal | Emergency CB | 2+1×M20 · 5-pole terminal

228,27 €
Type
Emergency (central battery; no addressing)
Zone (attribute)
1
Length
670 mm
Power
23.4 W
Flux AC
2375 lm
Diffuser
Opal
Glands
M20 / 2 glands on one side and 1 on the other
Ambient
-40°C…+45°C
IP
IP66 / IP67

Ex II 2G Ex eb mb IIC T4 Gb – Ex II 2D Ex tb IIIC T70°C Db

SKU: PL 60-1 530BOO
Category: , ,

Description

PL 60-1 530BOO is a PrimeLine luminaire, length 670 mm, power 23.4 W, Opal diffuser. PrimeLine ATEX emergency luminaire for central battery systems. Backup power comes from a compatible central system, not from a battery inside the luminaire. Certification covers Zones 1, 2, 21 and 22. GRP body, PC diffuser, IP66/IP67. Version B: central battery without addressing. Confirm system compatibility before ordering.

Technical specification

Parameters PL 60-1 530BOO
Ordering code PL 60-1 530BOO
Dimensions L×D×H 670x173x107
Power 23.4 W
Luminous flux AC 2375 lm
Luminous flux DC (emergency) 2375 lm
Colour temperature 4000 K
CRI >80
IP IP66 / IP67
IK IK09
Housing GRP
Diffuser Opal (PC)
Cable glands M20 — 2 glands on one side and 1 on the other
Terminals 5-pole
Through wiring 2.5 mm² / 105°C insulation
Isolating switch no
Ambient temperature -40°C…+45°C
ATEX / IECEx Ex II 2G Ex eb mb IIC T4 Gb – Ex II 2D Ex tb IIIC T70°C Db
Zone 1

Code PL 60-1 530BOO means: 670 mm, ~10 W LED module, 5-pole terminal, M20 (2 glands on one side and 1 on the other), central battery, no addressing, no isolating switch, opal diffuser.

Applications and limitations

  • backup power from a central system — not from a battery inside the luminaire;
  • version B: central battery without addressing; confirm system compatibility;
  • take photometric and Ex data from this SKU / nameplate — do not generalise the whole family;
  • install per IEC 60079-14 and the instruction for the exact version (S/B, 1/3 or X/Y);
  • final selection must be made by a competent person for the installation.

Documents

FAQ

Does this luminaire have ATEX and IECEx certificates?

Yes. PrimeLine is covered by ATEX KSCP 25ATEX0029X and IECEx KSCP 25.0045X. Take the full Ex marking and temperature from the nameplate / this SKU.

Which zones is it intended for?

Certification covers gas Zones 1 and 2 and dust Zones 21 and 22. In the shop the Zone attribute for PrimeLine is 1. Final selection depends on the installation documents.

What is the ambient temperature range?

For PL 60-1 530BOO: -40°C…+45°C. HT/LT suffixes change the range — always confirm in the product code.

Does the luminaire include its own battery?

No. Backup power comes from a central system. Confirm CBX/CBY/B compatibility before ordering.

How does general lighting differ from emergency variants?

Code S = general. Codes 1/3 = internal battery (1.5 h / 3 h). Codes B/X/Y = central battery. These are separate SKUs and category children.

What luminous flux and power does PL 60-1 530BOO have?

PL 60-1 530BOO: 23.4 W, mains luminous flux 2375 lm, emergency mode 2375 lm. Wide symmetric distribution of approx. 115°. For lighting design (e.g. DIALux) use the photometric file of this code under Documents.

How many cable glands and stopping plugs does this luminaire need?

The luminaire has 3 M20 entries (2 glands on one side and 1 on the other). Each needs a certified Ex cable gland matched to the cable diameter, and an unused one a certified stopping plug; an ordinary gland or plug breaches the luminaire certificate. Ex glands and stopping plugs are in the AtexBox gland accessories category.

Can supply be looped through this luminaire?

Yes. Glands at both ends allow supply to be looped through consecutive luminaires (through-wiring), reducing junction boxes.

Does this luminaire have an isolating switch, and what is its Ex marking?

No. Gas marking: II 2G Ex eb mb IIC T4 Gb. The version with switch has R instead of O in the code.

Which central battery system does it work with?

With an unmonitored central battery (variant B). For per-luminaire supervision choose X (EATON V-CG-S) or Y (V-CG-SE).

How is it built, and where is it used?

GRP body, UV-stabilised polycarbonate diffuser, IK09, IP66/IP67; the diffuser and LED plate are hinged, so nothing has to be set aside when opening. Ambient temperature for this code: -40°C…+45°C. Typical locations: loading ramps, unheated warehouses, cold stores (with the version matched to temperature) and chemical and petrochemical plants.

Where can I download the certificate and instructions?

See Documents on this page: ATEX, IECEx, EU declaration, data sheet, version-specific instruction and photometry.

Other PrimeLine lengths / powers — Central battery (no addressing) · Opal diffuser

Same function subcategory and the same terminals, gland layout and diffuser. Length and LED module vary. The current SKU is highlighted.

SKU Length Module Power Flux AC
PL 60-1 530BOO 670 mm 1 23.4 W 2375 lm
PL 60-2 530BOO 670 mm 2 28.0 W 2913 lm
PL 60-3 530BOO 670 mm 3 32.4 W 3374 lm
PL 12-1 530BOO 1270 mm 1 43.0 W 4820 lm
PL 12-2 530BOO 1270 mm 2 52.5 W 5880 lm
PL 12-3 530BOO 1270 mm 3 62.0 W 6696 lm

Additional information

Type

Zone

Length

670 mm

Diffuser

Gland size

Gland layout

Terminals

Isolating switch

Through wiring

Colour temperature

Ex protection

,

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.