PrimeLine 1270 mm 56.5 W | Opal | Emergency 3 h | 1×M25 · 7-pole terminal

548,18 €
Type
Emergency (internal battery; 3h)
Zone (attribute)
1
Length
1270 mm
Power
56.5 W
Flux AC
5880 lm
Diffuser
Opal
Glands
M25 / 1 gland, one side
Ambient
0°C…+40°C
IP
IP66 / IP67

Ex II 2G Ex eb mb IIC T4 Gb – Ex II 2D Ex tb IIIC T70°C Db

SKU: PL 12-2 7153OO
Category: , ,

Description

PL 12-2 7153OO is a PrimeLine luminaire, length 1270 mm, power 56.5 W, Opal diffuser. PrimeLine ATEX emergency light with battery (3 h, self-contained). Certification covers Zones 1, 2, 21 and 22. This SKU is the battery variant only, not generic ATEX emergency lighting. GRP body, PC diffuser, IP66/IP67.

Technical specification

Parameters PL 12-2 7153OO
Ordering code PL 12-2 7153OO
Dimensions L×D×H 1270x173x107
Power 56.5 W
Luminous flux AC 5880 lm
Luminous flux DC (emergency) 400 lm
Colour temperature 4000 K
CRI >80
IP IP66 / IP67
IK IK09
Housing GRP
Diffuser Opal (PC)
Cable glands M25 — 1 gland, one side
Terminals 7-pole
Through wiring Not applicable
Isolating switch no
Ambient temperature 0°C…+40°C
ATEX / IECEx Ex II 2G Ex eb mb IIC T4 Gb – Ex II 2D Ex tb IIIC T70°C Db
Zone 1

Code PL 12-2 7153OO means: 1270 mm, ~12 W LED module, 7-pole terminal, M25 (1 gland, one side), internal NiCd battery, 3 h, no isolating switch, opal diffuser.

Applications and limitations

  • self-contained NiCd battery variant — not general or central-battery lighting;
  • replace the battery only outside the hazardous atmosphere, per the instruction;
  • emergency duration for this SKU: 3 h;
  • take photometric and Ex data from this SKU / nameplate — do not generalise the whole family;
  • install per IEC 60079-14 and the instruction for the exact version (S/B, 1/3 or X/Y);
  • final selection must be made by a competent person for the installation.

Documents

FAQ

Does this luminaire have ATEX and IECEx certificates?

Yes. PrimeLine is covered by ATEX KSCP 25ATEX0029X and IECEx KSCP 25.0045X. Take the full Ex marking and temperature from the nameplate / this SKU.

Which zones is it intended for?

Certification covers gas Zones 1 and 2 and dust Zones 21 and 22. In the shop the Zone attribute for PrimeLine is 1. Final selection depends on the installation documents.

What is the ambient temperature range?

For PL 12-2 7153OO: 0°C…+40°C. HT/LT suffixes change the range — always confirm in the product code.

What is the emergency duration?

For this SKU: 3 h. Do not assign both values to one code.

How does general lighting differ from emergency variants?

Code S = general. Codes 1/3 = internal battery (1.5 h / 3 h). Codes B/X/Y = central battery. These are separate SKUs and category children.

What luminous flux and power does PL 12-2 7153OO have?

PL 12-2 7153OO: 56.5 W, mains luminous flux 5880 lm, emergency mode 400 lm. Wide symmetric distribution of approx. 115°. For lighting design (e.g. DIALux) use the photometric file of this code under Documents.

How many cable glands and stopping plugs does this luminaire need?

The luminaire has 1 M25 entry (1 gland, one side). Each needs a certified Ex cable gland matched to the cable diameter, and an unused one a certified stopping plug; an ordinary gland or plug breaches the luminaire certificate. Ex glands and stopping plugs are in the AtexBox gland accessories category.

Can supply be looped through this luminaire?

No. Glands are on one end only — for through-wiring choose a version with glands at both ends (1+1, 2+1 or 2+2).

Does this luminaire have an isolating switch, and what is its Ex marking?

No — the isolating switch is not available on 1.5 h and 3 h battery versions. Gas marking: II 2G Ex eb mb IIC T4 Gb.

Which battery does this luminaire have?

NiCd battery, emergency duration 3 h. The battery is not replaced in an explosive atmosphere — replace per the series instruction.

How is it built, and where is it used?

GRP body, UV-stabilised polycarbonate diffuser, IK09, IP66/IP67; the diffuser and LED plate are hinged, so nothing has to be set aside when opening. Ambient temperature for this code: 0°C…+40°C. Typical locations: loading ramps, unheated warehouses, cold stores (with the version matched to temperature) and chemical and petrochemical plants.

Where can I download the certificate and instructions?

See Documents on this page: ATEX, IECEx, EU declaration, data sheet, version-specific instruction and photometry.

Other PrimeLine lengths / powers — Internal battery 3 h · Opal diffuser

Same function subcategory and the same terminals, gland layout and diffuser. Length and LED module vary. The current SKU is highlighted.

SKU Length Module Power Flux AC
PL 60-2 7153OO 670 mm 2 31.6 W 2913 lm
PL 12-2 7153OO 1270 mm 2 56.5 W 5880 lm

Additional information

Type

Zone

Length

1270 mm

Diffuser

Gland size

Gland layout

Terminals

Isolating switch

Through wiring

Colour temperature

Ex protection

,

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.