Description
HCG2N3M32 is an HCG2 double-compression cable gland for SWA/SWB armoured cables, with M32 (Metric) thread, made of Nickel plated brass. It carries Ex db / Ex eb / Ex tb marking, IP66 / IP68 (1.5 m, 2 h) ingress protection, temperature range −55°C … +160°C, and certificates DNV 22 ATEX 53555X / IECEx DNV 22.0086X. Sealing code 32, outer OD 23.7–33.4 mm, under-armour OD 17.1–26 mm. Not a substitute for HCG1 on unarmoured cable.
Technical specification
| SKU | HCG2N3M32 |
|---|---|
| Type | HCG2 — armoured, double compression |
| Material | Nickel plated brass |
| Thread | M32 (Metric) |
| Sealing code | 32 |
| Outer cable OD | 23.7–33.4 mm |
| Under-armour OD | 17.1–26 mm |
| Armour grooved | 0.4–1.2 mm |
| Armour graduated | 1.6–2 mm |
| Ex marking | II 2G Ex db IIC Gb; II 2G Ex eb IIC Gb; II 2D Ex tb IIIC Db |
| Zones | 1, 2, 21, 22 |
| IP | IP66 / IP68 (1.5 m, 2 h) |
| Temperature | −55°C … +160°C |
| ATEX certificate | DNV 22 ATEX 53555X |
| IECEx certificate | IECEx DNV 22.0086X |
Applications and limitations
- circular, effectively filled SWA/SWB armoured cables only;
- do not use HCG2 as a general unarmoured gland (use HCG1);
- armour cone must match armour thickness;
- install to IEC 60079-14 and the HCG2 instruction;
- M16 entry: HAD adaptor + HCG2 M20, not an “M16 gland”.
Documents
- ATEX certificate DNV 22 ATEX 53555X
- IECEx DNV 22.0086X
- EU Declaration of Conformity HCG1 / HCG2
- HCG2 Double Compression instruction
- HCG2 data sheet
- HARDO cable-gland catalogue
FAQ
Does HCG2 have ATEX and IECEx certificates?
Yes. HCG2 is covered by ATEX DNV 22 ATEX 53555X and IECEx DNV 22.0086X. Gas markings are II 2G Ex db IIC Gb and II 2G Ex eb IIC Gb; dust marking is II 2D Ex tb IIIC Db.
Which zones is HCG2 intended for?
When installation conditions and documentation are met: gas Zones 1 and 2 and dust Zones 21 and 22. Final selection must be made by a competent person.
Can HCG2 be used on unarmoured cable?
Not as a general substitute. HCG2 is a double-compression gland for SWA/SWB armoured cables. Use HCG1 for unarmoured cables.
How do I select the armour cone?
The reversible cone must match armour thickness. The published typical range is 0.3–4 mm; SKU-specific grooved/graduated ranges are in the specification table.
How do I match size to cable diameter?
Thread and sealing range must come from the same table row. Check under-armour OD and outer sheath OD for that SKU.
Where can I download the certificate and installation instruction?
HCG2 documents: ATEX certificate DNV 22 ATEX 53555X, IECEx DNV 22.0086X, EU Declaration of Conformity, HCG2 data sheet, HCG2 Double Compression instruction, HARDO catalogue.
Other HCG2 sizes — metric thread, nickel
Same series, thread family and material. Click CODE to open the product card.
| CODE | Thread | E [mm] | A under armour min–max | B overall min–max |
|---|---|---|---|---|
HCG2N1M20XS |
M20 | 17 | 3.2–8.5 | 6.2–13.1 |
HCG2N1M20S |
M20 | 17 | 6.2–11.6 | 9.6–15.5 |
HCG2N1M20 |
M20 | 17 | 8.0–13.9 | 12.5–20.9 |
HCG2N2M25S |
M25 | 17 | 11.2–19.6 | 14.0–21.5 |
HCG2N2M25 |
M25 | 17 | 11.2–19.6 | 18.3–25.6 |
HCG2N3M32 |
M32 | 17 | 17.1–26.0 | 23.7–33.4 |
HCG2N4M40 |
M40 | 17 | 22.1–31.6 | 28.0–39.5 |
HCG2N5M50S |
M50 | 17 | 29.5–37.5 | 35.2–46.0 |
HCG2N5M50 |
M50 | 17 | 35.6–43.1 | 40.5–52.4 |
HCG2N6M63S |
M63 | 17 | 40.1–48.7 | 45.6–58.5 |
HCG2N6M63 |
M63 | 17 | 47.2–55.2 | 54.6–64.5 |
HCG2N7M75S |
M75 | 17 | 52.8–61.2 | 59.0–70.4 |
HCG2N7M75 |
M75 | 17 | 59.1–67.2 | 66.7–76.3 |
HCG2N9M90 |
M90 | 24 | 66.6–79.2 | 76.2–87.2 |








Reviews
There are no reviews yet.