Cable gland 1 1/2″ 50S Brass | Non-armoured | NPT

14,93 €

Key parameters

Type
HCG1 — unarmoured, single compression
Ex marking
II 2G Ex db IIC Gb; II 2G Ex eb IIC Gb; II 2D Ex tb IIIC Db
Zones
1, 2, 21, 22
Material
Brass
Thread / size
1 1/2" (NPT)
Sealing code
50S
Cable OD range
31.1–37.5 mm
IP
IP66 / IP68 (1.5 m, 2 h)
Temperature
−55°C … +160°C
ATEX certificate
DNV 22 ATEX 53555X
IECEx certificate
IECEx DNV 22.0086X

II 2G Ex db IIC Gb; II 2G Ex eb IIC Gb; II 2D Ex tb IIIC Db

SKU: HCG1B5N50S
Category: ,
Tags: , , , , , , ,

Description

HCG1B5N50S is an HCG1 single-compression cable gland for unarmoured, screened or braided cables, with 1 1/2" (NPT) thread, made of Brass. It carries Ex db / Ex eb / Ex tb marking, IP66 / IP68 (1.5 m, 2 h) ingress protection, temperature range −55°C … +160°C, and certificates DNV 22 ATEX 53555X / IECEx DNV 22.0086X. Sealing code 50S (31.1–37.5 mm). Not for armoured cable — use HCG2 for armour.

Technical specification

Parameters HCG1B5N50S
SKU HCG1B5N50S
Type HCG1 — unarmoured, single compression
Material Brass
Thread 1 1/2" (NPT)
Sealing code 50S
Cable OD range 31.1–37.5 mm
Ex marking II 2G Ex db IIC Gb; II 2G Ex eb IIC Gb; II 2D Ex tb IIIC Db
Zones 1, 2, 21, 22
IP IP66 / IP68 (1.5 m, 2 h)
Temperature −55°C … +160°C
ATEX certificate DNV 22 ATEX 53555X
IECEx certificate IECEx DNV 22.0086X

Applications and limitations

  • circular, effectively filled cables only;
  • do not use HCG1 on SWA/SWB armoured cable;
  • separate cable strain relief required;
  • install to IEC 60079-14 and the HCG1 instruction;
  • M16 entry: HAD adaptor + HCG1 M20, not an “M16 gland”.

Documents

FAQ

Does HCG1 have ATEX and IECEx certificates?

Yes. HCG1 is covered by ATEX DNV 22 ATEX 53555X and IECEx DNV 22.0086X. Gas markings are II 2G Ex db IIC Gb and II 2G Ex eb IIC Gb; dust marking is II 2D Ex tb IIIC Db.

Which zones is HCG1 intended for?

When installation conditions and documentation are met: gas Zones 1 and 2 and dust Zones 21 and 22. Final selection must be made by a competent person.

Can HCG1 be used on armoured cable?

No. HCG1 is a single-compression gland for unarmoured, screened or braided cables. Use HCG2 for SWA/SWB armoured cables.

How do I match size to cable diameter?

Thread and sealing range must come from the same table row (sealing code, e.g. 20XS). Outer cable-OD range is listed in the specification table for that SKU.

Can an NPT gland be used in a metric entry?

No. The gland thread must match the enclosure entry. To change thread type or size use an HAD adaptor (e.g. M16 entry → HAD → HCG1 M20).

Where can I download the certificate and installation instruction?

HCG1 documents: ATEX certificate DNV 22 ATEX 53555X, IECEx DNV 22.0086X, EU Declaration of Conformity, HCG1 Single Compression instruction, HARDO catalogue.

Other HCG1 sizes — NPT thread, brass

Same series, thread family and material. Click CODE to open the product card.

CODE Thread E [mm] Cable Ø min–max A/F A/C
HCG1B1N20XS 1/2" 20 3.2–8.5 24 26.5
HCG1B1N20S 1/2" 20 6.2–11.6 24 26.5
HCG1B1N20 1/2" 20 8.0–13.9 27 30
HCG1B2N25 3/4" 21 11.2–19.6 36 40
HCG1B3N32 1" 26 17.1–26.0 42 46
HCG1B4N40 1 1/4" 26 23.6–31.6 50 55
HCG1B5N50S 1 1/2" 26 31.1–37.5 55 60
HCG1B5N50 2" 27 35.7–43.1 61 65
HCG1B6N63S 2" 27 41.6–48.7 70 77
HCG1B6N63 2 1/2" 40 47.3–55.2 74 81
HCG1B7N75S 2 1/2" 40 54.1–61.2 80 87
HCG1B7N75 3" 42 61.2–67.2 91 93
HCG1B9N90 3 1/2" 42 66.7–79.2 108 116

Additional information

Cable type

Material

Brass

Thread

Size

Cable sealing size

Ex protection

, ,

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…