Description
HCG1B7N75 is an HCG1 single-compression cable gland for unarmoured, screened or braided cables, with 3" (NPT) thread, made of Brass. It carries Ex db / Ex eb / Ex tb marking, IP66 / IP68 (1.5 m, 2 h) ingress protection, temperature range −55°C … +160°C, and certificates DNV 22 ATEX 53555X / IECEx DNV 22.0086X. Sealing code 75 (61.2–67.2 mm). Not for armoured cable — use HCG2 for armour.
Technical specification
| SKU | HCG1B7N75 |
|---|---|
| Type | HCG1 — unarmoured, single compression |
| Material | Brass |
| Thread | 3" (NPT) |
| Sealing code | 75 |
| Cable OD range | 61.2–67.2 mm |
| Ex marking | II 2G Ex db IIC Gb; II 2G Ex eb IIC Gb; II 2D Ex tb IIIC Db |
| Zones | 1, 2, 21, 22 |
| IP | IP66 / IP68 (1.5 m, 2 h) |
| Temperature | −55°C … +160°C |
| ATEX certificate | DNV 22 ATEX 53555X |
| IECEx certificate | IECEx DNV 22.0086X |
Applications and limitations
- circular, effectively filled cables only;
- do not use HCG1 on SWA/SWB armoured cable;
- separate cable strain relief required;
- install to IEC 60079-14 and the HCG1 instruction;
- M16 entry: HAD adaptor + HCG1 M20, not an “M16 gland”.
Documents
- ATEX certificate DNV 22 ATEX 53555X
- IECEx DNV 22.0086X
- EU Declaration of Conformity HCG1 / HCG2
- HCG1 Single Compression instruction
- HARDO cable-gland catalogue
FAQ
Does HCG1 have ATEX and IECEx certificates?
Yes. HCG1 is covered by ATEX DNV 22 ATEX 53555X and IECEx DNV 22.0086X. Gas markings are II 2G Ex db IIC Gb and II 2G Ex eb IIC Gb; dust marking is II 2D Ex tb IIIC Db.
Which zones is HCG1 intended for?
When installation conditions and documentation are met: gas Zones 1 and 2 and dust Zones 21 and 22. Final selection must be made by a competent person.
Can HCG1 be used on armoured cable?
No. HCG1 is a single-compression gland for unarmoured, screened or braided cables. Use HCG2 for SWA/SWB armoured cables.
How do I match size to cable diameter?
Thread and sealing range must come from the same table row (sealing code, e.g. 20XS). Outer cable-OD range is listed in the specification table for that SKU.
Can an NPT gland be used in a metric entry?
No. The gland thread must match the enclosure entry. To change thread type or size use an HAD adaptor (e.g. M16 entry → HAD → HCG1 M20).
Where can I download the certificate and installation instruction?
HCG1 documents: ATEX certificate DNV 22 ATEX 53555X, IECEx DNV 22.0086X, EU Declaration of Conformity, HCG1 Single Compression instruction, HARDO catalogue.
Other HCG1 sizes — NPT thread, brass
Same series, thread family and material. Click CODE to open the product card.
| CODE | Thread | E [mm] | Cable Ø min–max | A/F | A/C |
|---|---|---|---|---|---|
HCG1B1N20XS |
1/2" | 20 | 3.2–8.5 | 24 | 26.5 |
HCG1B1N20S |
1/2" | 20 | 6.2–11.6 | 24 | 26.5 |
HCG1B1N20 |
1/2" | 20 | 8.0–13.9 | 27 | 30 |
HCG1B2N25 |
3/4" | 21 | 11.2–19.6 | 36 | 40 |
HCG1B3N32 |
1" | 26 | 17.1–26.0 | 42 | 46 |
HCG1B4N40 |
1 1/4" | 26 | 23.6–31.6 | 50 | 55 |
HCG1B5N50S |
1 1/2" | 26 | 31.1–37.5 | 55 | 60 |
HCG1B5N50 |
2" | 27 | 35.7–43.1 | 61 | 65 |
HCG1B6N63S |
2" | 27 | 41.6–48.7 | 70 | 77 |
HCG1B6N63 |
2 1/2" | 40 | 47.3–55.2 | 74 | 81 |
HCG1B7N75S |
2 1/2" | 40 | 54.1–61.2 | 80 | 87 |
HCG1B7N75 |
3" | 42 | 61.2–67.2 | 91 | 93 |
HCG1B9N90 |
3 1/2" | 42 | 66.7–79.2 | 108 | 116 |







Reviews
There are no reviews yet.