Cable gland 1 1/2″ 50S Stainless steel 316L | Armoured | NPT

88,12 €

Key parameters

Type
HCG2 — armoured, double compression
Ex marking
II 2G Ex db IIC Gb; II 2G Ex eb IIC Gb; II 2D Ex tb IIIC Db
Zones
1, 2, 21, 22
Thread / size
1 1/2" (NPT)
Sealing code
50S
Outer cable OD
35.2–46 mm
Under-armour OD
29.5–37.5 mm
Armour grooved
0.4–1.6 mm
Armour graduated
2–2.5 mm
IP
IP66 / IP68 (1.5 m, 2 h)
Temperature
−55°C … +160°C
ATEX certificate
DNV 22 ATEX 53555X
IECEx certificate
IECEx DNV 22.0086X

II 2G Ex db IIC Gb; II 2G Ex eb IIC Gb; II 2D Ex tb IIIC Db

Description

HCG2S5N50S is an HCG2 double-compression cable gland for SWA/SWB armoured cables, with 1 1/2" (NPT) thread, made of Stainless steel 316L. It carries Ex db / Ex eb / Ex tb marking, IP66 / IP68 (1.5 m, 2 h) ingress protection, temperature range −55°C … +160°C, and certificates DNV 22 ATEX 53555X / IECEx DNV 22.0086X. Sealing code 50S, outer OD 35.2–46 mm, under-armour OD 29.5–37.5 mm. Not a substitute for HCG1 on unarmoured cable.

Technical specification

Parameters HCG2S5N50S
SKU HCG2S5N50S
Type HCG2 — armoured, double compression
Material Stainless steel 316L
Thread 1 1/2" (NPT)
Sealing code 50S
Outer cable OD 35.2–46 mm
Under-armour OD 29.5–37.5 mm
Armour grooved 0.4–1.6 mm
Armour graduated 2–2.5 mm
Ex marking II 2G Ex db IIC Gb; II 2G Ex eb IIC Gb; II 2D Ex tb IIIC Db
Zones 1, 2, 21, 22
IP IP66 / IP68 (1.5 m, 2 h)
Temperature −55°C … +160°C
ATEX certificate DNV 22 ATEX 53555X
IECEx certificate IECEx DNV 22.0086X

Applications and limitations

  • circular, effectively filled SWA/SWB armoured cables only;
  • do not use HCG2 as a general unarmoured gland (use HCG1);
  • armour cone must match armour thickness;
  • install to IEC 60079-14 and the HCG2 instruction;
  • M16 entry: HAD adaptor + HCG2 M20, not an “M16 gland”.

Documents

FAQ

Does HCG2 have ATEX and IECEx certificates?

Yes. HCG2 is covered by ATEX DNV 22 ATEX 53555X and IECEx DNV 22.0086X. Gas markings are II 2G Ex db IIC Gb and II 2G Ex eb IIC Gb; dust marking is II 2D Ex tb IIIC Db.

Which zones is HCG2 intended for?

When installation conditions and documentation are met: gas Zones 1 and 2 and dust Zones 21 and 22. Final selection must be made by a competent person.

Can HCG2 be used on unarmoured cable?

Not as a general substitute. HCG2 is a double-compression gland for SWA/SWB armoured cables. Use HCG1 for unarmoured cables.

How do I select the armour cone?

The reversible cone must match armour thickness. The published typical range is 0.3–4 mm; SKU-specific grooved/graduated ranges are in the specification table.

How do I match size to cable diameter?

Thread and sealing range must come from the same table row. Check under-armour OD and outer sheath OD for that SKU.

Where can I download the certificate and installation instruction?

HCG2 documents: ATEX certificate DNV 22 ATEX 53555X, IECEx DNV 22.0086X, EU Declaration of Conformity, HCG2 data sheet, HCG2 Double Compression instruction, HARDO catalogue.

Other HCG2 sizes — NPT thread, SS 316L

Same series, thread family and material. Click CODE to open the product card.

CODE Thread E [mm] A under armour min–max B overall min–max
HCG2S1N20XS 3/8" 20 3.2–8.5 6.2–13.1
HCG2S1N20S 1/2" 20 6.2–11.6 9.6–15.5
HCG2S1N20 1/2" 20 8.0–13.9 12.5–20.9
HCG2S2N25S 3/4" 21 11.2–19.6 14.0–21.5
HCG2S2N25 3/4" 21 11.2–19.6 18.3–25.6
HCG2S3N32 1" 26 17.1–26.0 23.7–33.4
HCG2S4N40 1 1/4" 26 22.1–31.6 28.0–39.5
HCG2S5N50S 1 1/2" 26 29.5–37.5 35.2–46.0
HCG2S5N50 2" 27 35.6–43.1 40.5–52.4
HCG2S6N63S 2" 27 40.1–48.7 45.6–58.5
HCG2S6N63 2 1/2" 40 47.2–55.2 54.6–64.5
HCG2S7N75S 2 1/2" 40 52.8–61.2 59.0–70.4
HCG2S7N75 3" 42 59.1–67.2 66.7–76.3
HCG2S9N90 3 1/2" 44 66.6–79.2 76.2–87.2

Additional information

Cable type

Material
Thread

Size

Cable sealing size

Ex protection

, ,

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…