PrimeLine 1270 mm 63.5 W | Opal | Emergency CBY | 2+2×M25 · 5-pole terminal

479,31 €
Type
Emergency (central battery; with addressing [CBY])
Zone (attribute)
1
Length
1270 mm
Power
63.5 W
Flux AC
6696 lm
Diffuser
Opal
Glands
M25 / 2 glands on each side
Ambient
-30°C…+45°C
IP
IP66 / IP67

Ex II 2G Ex eb mb IIC T4 Gb – Ex II 2D Ex tb IIIC T70°C Db

SKU: PL 12-3 545YOO
Category: , ,

Description

PL 12-3 545YOO is a PrimeLine luminaire, length 1270 mm, power 63.5 W, Opal diffuser. PrimeLine ATEX emergency luminaire for central battery systems. Backup power comes from a compatible central system, not from a battery inside the luminaire. Certification covers Zones 1, 2, 21 and 22. GRP body, PC diffuser, IP66/IP67. Version Y: CBY module, 5-pole terminals. Confirm system compatibility before ordering.

Technical specification

Parameters PL 12-3 545YOO
Ordering code PL 12-3 545YOO
Dimensions L×D×H 1270x173x107
Power 63.5 W
Luminous flux AC 6696 lm
Luminous flux DC (emergency) 6696 lm
Colour temperature 4000 K
CRI >80
IP IP66 / IP67
IK IK09
Housing GRP
Diffuser Opal (PC)
Cable glands M25 — 2 glands on each side
Terminals 5-pole
Through wiring 2.5 mm² / 105°C insulation
Isolating switch no
Ambient temperature -30°C…+45°C
ATEX / IECEx Ex II 2G Ex eb mb IIC T4 Gb – Ex II 2D Ex tb IIIC T70°C Db
Zone 1

Code PL 12-3 545YOO means: 1270 mm, ~14 W LED module, 5-pole terminal, M25 (2 glands on each side), central battery with addressing (CBY / V-CG-SE), no isolating switch, opal diffuser.

Applications and limitations

  • backup power from a central system — not from a battery inside the luminaire;
  • version Y (CBY): 5-pole terminals; confirm system compatibility;
  • take photometric and Ex data from this SKU / nameplate — do not generalise the whole family;
  • install per IEC 60079-14 and the instruction for the exact version (S/B, 1/3 or X/Y);
  • final selection must be made by a competent person for the installation.

Documents

FAQ

Does this luminaire have ATEX and IECEx certificates?

Yes. PrimeLine is covered by ATEX KSCP 25ATEX0029X and IECEx KSCP 25.0045X. Take the full Ex marking and temperature from the nameplate / this SKU.

Which zones is it intended for?

Certification covers gas Zones 1 and 2 and dust Zones 21 and 22. In the shop the Zone attribute for PrimeLine is 1. Final selection depends on the installation documents.

What is the ambient temperature range?

For PL 12-3 545YOO: -30°C…+45°C. HT/LT suffixes change the range — always confirm in the product code.

Does the luminaire include its own battery?

No. Backup power comes from a central system. Confirm CBX/CBY/B compatibility before ordering.

How does general lighting differ from emergency variants?

Code S = general. Codes 1/3 = internal battery (1.5 h / 3 h). Codes B/X/Y = central battery. These are separate SKUs and category children.

Where can I download the certificate and instructions?

See Documents on this page: ATEX, IECEx, EU declaration, data sheet, version-specific instruction and photometry.

Other PrimeLine lengths / powers — Central battery CBY · Opal diffuser

Same function subcategory and the same terminals, gland layout and diffuser. Length and LED module vary. The current SKU is highlighted.

SKU Length Module Power Flux AC
PL 60-1 545YOO 670 mm 1 24.6 W 2375 lm
PL 60-2 545YOO 670 mm 2 29.4 W 2913 lm
PL 60-3 545YOO 670 mm 3 33.5 W 3374 lm
PL 12-1 545YOO 1270 mm 1 44.2 W 4820 lm
PL 12-2 545YOO 1270 mm 2 54.0 W 5880 lm
PL 12-3 545YOO 1270 mm 3 63.5 W 6696 lm

Additional information

Type

Zone

Length

1270 mm

Diffuser

Gland size

Gland layout

Terminals

Isolating switch

Through wiring

Colour temperature

Ex protection

,

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.