PrimeLine 670 mm 29.4 W | Opal | Emergency CBY | 2×M20 · 5-pole terminal

327,10 €
IP
IP66 / IP67

Ex II 2G Ex eb mb IIC T4 Gb – Ex II 2D Ex tb IIIC T70°C Db

SKU: PL 60-2 550YOO
Category: , ,

Description

PL 60-2 550YOO is a PrimeLine luminaire, length 670 mm, power 29.4 W, Opal diffuser. PrimeLine ATEX emergency luminaire for central battery systems. Backup power comes from a compatible central system, not from a battery inside the luminaire. Certification covers Zones 1, 2, 21 and 22. GRP body, PC diffuser, IP66/IP67. Version Y: CBY module, 5-pole terminals. Confirm system compatibility before ordering.

Technical specification

Parameters PL 60-2 550YOO
Ordering code PL 60-2 550YOO
Dimensions L×D×H 670x173x107
Power 29.4 W
Luminous flux AC 2913 lm
Luminous flux DC (emergency) 2913 lm
Colour temperature 4000 K
CRI >80
IP IP66 / IP67
IK IK09
Housing GRP
Diffuser Opal (PC)
Cable glands M20 — 2 glands, one side only
Terminals 5-pole
Through wiring Not applicable
Isolating switch no
Ambient temperature -30°C…+45°C
ATEX / IECEx Ex II 2G Ex eb mb IIC T4 Gb – Ex II 2D Ex tb IIIC T70°C Db
Zone 1

Code PL 60-2 550YOO means: 670 mm, ~12 W LED module, 5-pole terminal, M20 (2 glands, one side only), central battery with addressing (CBY / V-CG-SE), no isolating switch, opal diffuser.

Applications and limitations

  • backup power from a central system — not from a battery inside the luminaire;
  • version Y (CBY): 5-pole terminals; confirm system compatibility;
  • take photometric and Ex data from this SKU / nameplate — do not generalise the whole family;
  • install per IEC 60079-14 and the instruction for the exact version (S/B, 1/3 or X/Y);
  • final selection must be made by a competent person for the installation.

Documents

FAQ

Does this luminaire have ATEX and IECEx certificates?

Yes. PrimeLine is covered by ATEX KSCP 25ATEX0029X and IECEx KSCP 25.0045X. Take the full Ex marking and temperature from the nameplate / this SKU.

Which zones is it intended for?

Certification covers gas Zones 1 and 2 and dust Zones 21 and 22. In the shop the Zone attribute for PrimeLine is 1. Final selection depends on the installation documents.

What is the ambient temperature range?

For PL 60-2 550YOO: -30°C…+45°C. HT/LT suffixes change the range — always confirm in the product code.

Does the luminaire include its own battery?

No. Backup power comes from a central system. Confirm CBX/CBY/B compatibility before ordering.

How does general lighting differ from emergency variants?

Code S = general. Codes 1/3 = internal battery (1.5 h / 3 h). Codes B/X/Y = central battery. These are separate SKUs and category children.

What luminous flux and power does PL 60-2 550YOO have?

PL 60-2 550YOO: 29.4 W, mains luminous flux 2913 lm, emergency mode 2913 lm. Wide symmetric distribution of approx. 115°. For lighting design (e.g. DIALux) use the photometric file of this code under Documents.

How many cable glands and stopping plugs does this luminaire need?

The luminaire has 2 M20 entries (2 glands, one side only). Each needs a certified Ex cable gland matched to the cable diameter, and an unused one a certified stopping plug; an ordinary gland or plug breaches the luminaire certificate. Ex glands and stopping plugs are in the AtexBox gland accessories category.

Can supply be looped through this luminaire?

No. Glands are on one end only — for through-wiring choose a version with glands at both ends (1+1, 2+1 or 2+2).

Does this luminaire have an isolating switch, and what is its Ex marking?

No. Gas marking: II 2G Ex eb mb IIC T4 Gb. The version with switch has R instead of O in the code.

Which central battery system does it work with?

With a monitored EATON central battery — the addressable EATON V-CG-SE module lets the central unit supervise each luminaire.

How is it built, and where is it used?

GRP body, UV-stabilised polycarbonate diffuser, IK09, IP66/IP67; the diffuser and LED plate are hinged, so nothing has to be set aside when opening. Ambient temperature for this code: -30°C…+45°C. Typical locations: loading ramps, unheated warehouses, cold stores (with the version matched to temperature) and chemical and petrochemical plants.

Where can I download the certificate and instructions?

See Documents on this page: ATEX, IECEx, EU declaration, data sheet, version-specific instruction and photometry.

Additional information

Type
Zone
Length
Diffuser
Gland size
Gland layout
Terminals
Isolating switch
Through wiring
Colour temperature
Ex protection

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.