Cable gland M20 20S Brass | Armoured | Metric

8,66 €

Key parameters

Type
HCG2 — armoured, double compression
Ex marking
II 2G Ex db IIC Gb; II 2G Ex eb IIC Gb; II 2D Ex tb IIIC Db
Zones
1, 2, 21, 22
Material
Brass
Thread / size
M20 (Metric)
Sealing code
20S
Outer cable OD
9.6–15.5 mm
Under-armour OD
6.2–11.6 mm
Armour grooved
0.3–1 mm
Armour graduated
0.8–1.25 mm
IP
IP66 / IP68 (1.5 m, 2 h)
Temperature
−55°C … +160°C
ATEX certificate
DNV 22 ATEX 53555X
IECEx certificate
IECEx DNV 22.0086X

II 2G Ex db IIC Gb; II 2G Ex eb IIC Gb; II 2D Ex tb IIIC Db

SKU: HCG2B1M20S
Category: ,
Tags: , , , , , , ,

Description

HCG2B1M20S is an HCG2 double-compression cable gland for SWA/SWB armoured cables, with M20 (Metric) thread, made of Brass. It carries Ex db / Ex eb / Ex tb marking, IP66 / IP68 (1.5 m, 2 h) ingress protection, temperature range −55°C … +160°C, and certificates DNV 22 ATEX 53555X / IECEx DNV 22.0086X. Sealing code 20S, outer OD 9.6–15.5 mm, under-armour OD 6.2–11.6 mm. Not a substitute for HCG1 on unarmoured cable.

Technical specification

Parameters HCG2B1M20S
SKU HCG2B1M20S
Type HCG2 — armoured, double compression
Material Brass
Thread M20 (Metric)
Sealing code 20S
Outer cable OD 9.6–15.5 mm
Under-armour OD 6.2–11.6 mm
Armour grooved 0.3–1 mm
Armour graduated 0.8–1.25 mm
Ex marking II 2G Ex db IIC Gb; II 2G Ex eb IIC Gb; II 2D Ex tb IIIC Db
Zones 1, 2, 21, 22
IP IP66 / IP68 (1.5 m, 2 h)
Temperature −55°C … +160°C
ATEX certificate DNV 22 ATEX 53555X
IECEx certificate IECEx DNV 22.0086X

Applications and limitations

  • circular, effectively filled SWA/SWB armoured cables only;
  • do not use HCG2 as a general unarmoured gland (use HCG1);
  • armour cone must match armour thickness;
  • install to IEC 60079-14 and the HCG2 instruction;
  • M16 entry: HAD adaptor + HCG2 M20, not an “M16 gland”.

Documents

FAQ

Does HCG2 have ATEX and IECEx certificates?

Yes. HCG2 is covered by ATEX DNV 22 ATEX 53555X and IECEx DNV 22.0086X. Gas markings are II 2G Ex db IIC Gb and II 2G Ex eb IIC Gb; dust marking is II 2D Ex tb IIIC Db.

Which zones is HCG2 intended for?

When installation conditions and documentation are met: gas Zones 1 and 2 and dust Zones 21 and 22. Final selection must be made by a competent person.

Can HCG2 be used on unarmoured cable?

Not as a general substitute. HCG2 is a double-compression gland for SWA/SWB armoured cables. Use HCG1 for unarmoured cables.

How do I select the armour cone?

The reversible cone must match armour thickness. The published typical range is 0.3–4 mm; SKU-specific grooved/graduated ranges are in the specification table.

How do I match size to cable diameter?

Thread and sealing range must come from the same table row. Check under-armour OD and outer sheath OD for that SKU.

Where can I download the certificate and installation instruction?

HCG2 documents: ATEX certificate DNV 22 ATEX 53555X, IECEx DNV 22.0086X, EU Declaration of Conformity, HCG2 data sheet, HCG2 Double Compression instruction, HARDO catalogue.

Other HCG2 sizes — metric thread, brass

Same series, thread family and material. Click CODE to open the product card.

CODE Thread E [mm] A under armour min–max B overall min–max
HCG2B1M20XS M20 17 3.2–8.5 6.2–13.1
HCG2B1M20S M20 17 6.2–11.6 9.6–15.5
HCG2B1M20 M20 17 8.0–13.9 12.5–20.9
HCG2B2M25S M25 17 11.2–19.6 14.0–21.5
HCG2B2M25 M25 17 11.2–19.6 18.3–25.6
HCG2B3M32 M32 17 17.1–26.0 23.7–33.4
HCG2B4M40 M40 17 22.1–31.6 28.0–39.5
HCG2B5M50S M50 17 29.5–37.5 35.2–46.0
HCG2B5M50 M50 17 35.6–43.1 40.5–52.4
HCG2B6M63S M63 17 40.1–48.7 45.6–58.5
HCG2B6M63 M63 17 47.2–55.2 54.6–64.5
HCG2B7M75S M75 17 52.8–61.2 59.0–70.4
HCG2B7M75 M75 17 59.1–67.2 66.7–76.3
HCG2B9M90 M90 24 66.6–79.2 76.2–87.2

Additional information

Cable type

Material

Brass

Thread

Size

Cable sealing size

Ex protection

, ,

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…