Description
Technical Data
Certification: ATEX, IECEx, CNBOP
ATEX marking:II 2 D Ex tb IIIC T70 °C Db ( Cert. no.: KSCP 23ATEX0021X )
II 3 G Ex ec IIC T4 Gc ( Cert. no.: KSCP 23ATEX0022X )
IECEx marking:
Ex tb IIIC T70 °C Db ( Cert. no.: IECEx KSCP 23.0045X )
Ex ec IIC T4 Gc ( Cert. no.: IECEx KSCP 23.0045X )
Material of Enclosure: GRP
Material of Diffuser: UV stabilized PC (Polycarbonate)
Diffuser in three versions: clear/ opal / frosted
Impact resistance: HIGH (acc. to EN IEC 60079-0)
IP rating: IP66/ IP67
Color Temperature: 4000 K (optionally: 3000K or 5000 K)
CRI: >80 (optionally: >70 or >90)
Ambient temperature: -40°C – +50°C (ATEX)
Description
Construction
The ATEX OptiLine series fixture is equipped with a high-efficiency LED module. Depending on the version, it can be used as both general lighting and/or emergency lighting. The body is made of fiberglass-reinforced polyester (GRP), while the diffuser is made of UV-stabilized polycarbonate. The diffuser of the fixture is available in three variants: transparent, frosted, and opal. The Ex OptiLine lighting fixture allows the use of lenses that enable easy change of the direction of lighting.
Through-wiring with two power connectors, as well as the possibility to use up to four M20 or M25 cable glands, allows connecting the fixture in various configurations without the need to use distribution boxes. This solution also reduces the length of power cables and cable trays, and allows the use of cables from different manufacturers and of various cross-sections.
The ATEX OptiLine fixture does not have any loose parts that could fall off during installation. The diffuser and the internal mounting plate are connected to the body via hinges, and the diffuser clasps and mounting plate screws are integrated with the housing.
Application
TheOptiLine ATEX fixtures are designed for use both outdoors and indoors. They have been engineered for use in Zone 2, where there is a risk of explosion due to gases, vapors, or mists of flammable liquids, assigned to explosion groups IIA, IIB, or IIC, and to temperature classes T4, T3, T2, T1. Additionally, they are suitable for use in Zones 21 and 22, where there is a risk of explosion of flammable dusts from explosion groups IIIA, IIIB, or IIIC with an ignition temperature of a 5mm dust layer higher than 145°C.
The explosion-proof OptiLine fixture is designed for use in harsh and moderate working conditions. Its high resistance to chemicals, mechanical damage, and weather conditions makes it an excellent choice for the chemical, petrochemical, energy, woodworking, and food industries.
However, it can also be effectively utilized in manufacturing plants and warehouses, where long durability and ATEX, IECEx, and CNBOP certification are required.
Fast and cost efficient installation of lighting fixtures:
The ATEX OptiLine fixture features through-wiring with two easily accessible power connectors located at both ends of the lamp. The body of the lamp accommodates up to 4 cable glands M20 or M25. These solutions allow for the elimination of expensive Ex-rated junction boxes, as well as a reduction in the consumption of power cables and cable trays. Meanwhile, the larger M25 gland provides the flexibility to use cables from various manufacturers, including thicker non-flammable cables, as well as cables with increased conductor diameter to reduce voltage drops over distance.
Price
ATEX OptiLine fixtures provide a very good quality-to-price ratio, and thanks to the implemented solutions, they can also significantly reduce the final costs of lighting installation. Send a non-binding inquiry to find out about the cost-effectiveness of using our fixtures.
- connect luminaires in a pass-through manner
- eliminate junction boxes
- reduce power cable consumption
- minimize cable trays and hanger usage
- shorten luminaire installation time
- lower lighting installation costs
Direct the light as you need
- up to 22 additional lenses
- easily illuminate key areas
- avoid obstacles
- one fixture, multiple light directions
- easy lens replacement
Install quickly and safely – no loose parts:
-
the large space inside facilitates power connection
-
unscrew the screws by hand to quickly access the electronics
- the open diffuser does not fall thanks to the hinges
- the open plate with the LED module does not fall thanks to the hinges
- all components of the fixture are interconnected
Reviews
There are no reviews yet.